Providence Nocturnal Scoliosis® Orthosis
Product Overview
The Providence Nocturnal Scoliosis® System has been successful in treating all curve types: lumbar, thoracic, double major, and thoracolumbar.
The Providence Nocturnal Scoliosis® Orthosis is an effective nighttime brace for treatment of Adolescent Idiopathic Scoliosis (AIS). This orthosis is suited for neurologically involved patients, idiopathic adolescents and juvenile scoliosis patients as well as obese patients. Because of the nocturnal design, it is able to address an apex of T6, which is higher than can be treated by a full-time scoliosis orthosis. Apices above T6 can be treated with a neck extension attached to the orthosis.
The Providence® brace is designed to be worn at nighttime with the patient supine.
Current x-rays are necessary to confirm and provide a positive outcome. Because of the nocturnal use of the orthosis, the curves can be treated more aggressively and better patient compliance is achieved. A cast or scan of a patient is required if the patient is unable to be measured using the Providence board or if a board is not available.
The Providence® brace has demonstrated greater compliance rates in scoliosis bracing.
Spinal Technology, Inc. is the exclusive manufacturer of the Providence Nocturnal Scoliosis® Orthosis.
Spinal Indications
- Lumbar Curves
- Thoracic Curves
- Double Major Curves
- Thoracolumbar Curves
Features
- Brace is fabricated using the patented Providence® measuring board and CAD/CAM technology. The combination of the two ensures consistent and precise fabrication of this orthosis.
- Hyper-correction.
- Increased patient compliance.
- Nighttime Orthosis.
SCT 3D Full-Time Scoliosis Brace
Product Overview
Our SCT 3D Full-Time Scoliosis Orthosis is designed using CAD/CAM technology. This orthosis provides a brace design that corrects the spine based on three body planes, the Sagittal, Coronal and Transverse (SCT) and provides a precise combination of lateral and rotational forces that move the spine into a corrected position.
This design allows for lateral shift of the curves to midline and provides relief/void areas on opposing sides of the scoliosis curve from both rotational and lateral forces.
Using CAD/CAM technology allows for precise fabrication to maximize spinal correction that can be measured to the exact millimeter.
Spinal Indications
- Idiopathic Scoliosis
- Lumbar Curves
- Thoracic Curves
- Double Major Curves
- Thoracolumbar Curves
Features
- Computer enhanced modification via CAD/CAM technology.
- Each design is customized to patient’s shape and curve pattern.
- Provides the ability to control the angles of the Sagittal plane regarding lumbar lordosis.
- Two relief window sizes available.
SCT 3D Chêneau (Style) Scoliosis Brace
Product Overview
The SCT 3D Chêneau (Style) brace is a corrective TLSO uniquely constructed to bring the body and spine into the best possible postural and morphological 3D corrected alignment by using a combination of forces applied to the body surface by specifically designed pads, facilitated by expansion or relief spaces.
Expansion areas are also essential for tissue migration, growth, and breathing movements. The brace is open in front and can be considered rigid and dynamic at the same time.
All the pads are located, shaped, and oriented in a highly specific manner to push on selected regions of the trunk to bring the patient into the best possible 3D correction, while the remaining areas are not touched by the brace (i.e., areas of expansion or relief spaces). The corrective reaction of the body depends on the level, shape, and orientation of the pads.
Based on the patients X-rays, the observed spinal curve pattern determines the specific design of the pads and expansion spaces.
The SCT 3D Chêneau (Style) brace is a 3D corrective orthosis able to provide excellent in-brace correction as well as radiological and cosmetic end results.
Spinal Indications
- Idiopathic Scoliosis
- Lumbar Curves
- Thoracic Curves
- Double Major Curves
- Thoracolumbar Curves
Features
- Computer enhanced modification via CAD/CAM technology.
- Each design is customized to patient’s shape and curve pattern.
- Void/Relief options.
- Unlined orthosis.
SCT 3D Wilmington (Style) Scoliosis Brace
Product Overview
The SCT 3D Wilmington (style) brace is a custom TLSO that is designed using CAD/CAM technology. This orthosis provides a 3D brace design that corrects the spine based on three body planes, the Sagittal, Coronal and Transverse (SCT) and provides a precise combination of lateral and rotational forces that move the spine into a corrected position. This orthosis provides passive correction of scoliosis curve with apices at or below T7.
This brace design maintains corrective forces at the curve apices, the iliac crests, greater trochanters, and symphysis pubis. Using CAD/CAM technology allows for precise fabrication to maximize spinal correction that can be measured to the exact millimeter.
Spinal Indications
- Idiopathic Scoliosis
- Lumbar Curves
- Thoracic Curves
- Double Major Curves
- Thoracolumbar Curves
Features
- Provides the ability to control the angles of the sagittal plane regarding lumbar lordosis and thoracic kyphosis.
- Treat apices at or below T7.
- Computer enhanced modification via CAD/CAM technology.
- Each design is customized to patient’s shape and curve pattern.
Full-Time Scoliosis Brace
Product Overview
The full-time scoliosis orthosis is a TLSO designed to slow the progression of scoliosis in growing spines. The brace has been clinically proven to control curve progression in Lumbar, Thoracic and Thoracolumbar spinal curves. This orthosis is effective for treatment of (AIS) Adolescent Idiopathic Scoliosis.
Using the patients x-rays to define the spinal curve presented, the brace is fabricated based on scan, measurements or cast taken and is custom fit for each individual patient.
Spinal Indications
- Idiopathic Scoliosis
- Lumbar Curves
- Thoracic Curves
- Double Major Curves
- Thoracolumbar Curves
Features
- Custom to scan, measurement, or cast.
- Pressure pads with relief opposite.
- Finished to x-rays provided.
- Can treat apices up to T-7.
- Many design variations available.
Kyphosis Brace
Product Overview
In a healthy spine, its natural curve should be at an angle around 20-45 degrees. Those who have kyphosis, however, their abnormal curvature in their spine sits at an angle of over 50 degrees.
Our Kyphosis orthosis is low profile with a custom sternal shield attached. The posterior is reinforced and allows for corrective force at the apex of kyphosis. This brace is designed to help correct and stabilize this condition.
Spinal Indications
- Scheuermann’s Kyphosis
- Mild Structural Kyphosis
- Postural Stabilization
- Kyphoscoliosis
Features
- Anterior Milwaukee bar with sternal shield allows for height adjustment and extension force.
- Easily concealed under clothing.
- Low profile design increases compliance.
- Posterior is reinforced to allow corrective force at apex of kyphosis.
Low Profile Milwaukee Brace
Product Overview
The Milwaukee style brace is widely used to treat idiopathic scoliosis and Scheuermann’s disease, and structural kyphosis. A low-profile neck ring, held in place by an adjustable vertical bar, addresses curves with apices higher than T7.
Spinal Indications
- Scoliosis
- Scheuermann’s Kyphosis
- Structural Kyphosis
Features
- Multiple adjustment capabilities.
- The neck ring can be adjusted.
- For kyphosis, static pads can be attached to the posterior upright or a dynamic floating pad to anterior cross bar.
- Open system maximizes correction.
- The thoracic and axilla pads can be tightened or loosened to influence correction and to center the patient within the superstructure.
Kyphologic Brace
Product Overview
The Kyphologic style w/ Anterior opening & “Cow Horns” that attach laterally and allows for a corrective force at the apex of kyphosis. The brace is used to correct Kyphosis and stabilize adult patients.
Spinal Indications
- Mild Structural Kyphosis
- Scheuermann’s Kyphosis
- Postural Stabilization
- Kyphoscoliosis
Features
- The trims are designed to allow hips & scapulae to be relieved of pressure, to move more freely and is easier to conceal under clothing.
- “Cow Horns” allow for adjustment of height, & pivot for more extension force.